Consumer unit upgrades, done in a day

If your fuse board has rewireable fuses, a wooden back or no RCD protection, it is time to replace it. Most upgrades are finished in a day, with the power back on before we leave.

5.0 from 71 Google reviews (opens in a new tab)
An electrician connecting cables to the breakers in a consumer unit

We fit metal consumer units with an RCBO on each circuit, so a fault on one circuit only switches off that circuit rather than half the house. We also fit surge protection, which the current wiring regulations call for in most homes.

Before the new board goes in, we test every circuit. If we find a fault that would stop the new board working safely, we show you, explain it and price the repair before going further. Replacing a consumer unit is notifiable under Part P, so we register it and you receive a Building Regulations certificate.

What's included

RCBO on every circuit

One fault no longer switches off half the house.

Surge protection

Fitted as standard, as the wiring regulations require.

Every circuit tested

Before and after, with the results on your certificate.

Labelled clearly

Every way named so you know what each switch does.

Part P notified

We register the work and you receive the certificate by post.

Power back the same day

Most upgrades take six to eight hours.

Cables connected to the breakers in an open consumer unit

Hemel Hempstead

A 1970s fuse board replaced in a day

A fuse board with rewireable fuses in a Leverstock Green semi was replaced with a twelve-way metal consumer unit with RCBOs and surge protection. Two faulty sockets were found during testing and repaired the same day.

Read about the job

Reviews

Reviews from our Google profile, shown as written, newest first.

5.0

71 Google reviews

Shown exactly as written on Google. We reply to every review, good or bad.

Read every review See us on Google (opens in a new tab)

FAQs

Straight answers on price, certificates and safety. If your question is not here, call the office.

How do I know if my fuse board needs replacing?

If it has rewireable fuses, a wooden or plastic case, or no RCDs, we recommend replacing it. We can check it at a short visit and tell you honestly.

Will I be without power all day?

Only while the new board is connected and tested, usually most of the working day. We switch the fridge and freezer back on as soon as we can.

Get a free quote

Call the office, or send a few details and we will call you back to arrange a visit.

01632 960 562

We reply within one working hour, Monday to Saturday.

Monday to Friday 8:00–17:30
Saturday 9:00–12:00

WhatsApp

Send us your details

We use your details only to reply to this enquiry. Read our privacy notice.

CallGet a quoteWhatsApp
Example website for an invented business, built by Output Loop