01 / SET OUT
Plates down, plan first.
Base plates on sole boards, levelled before a single tube goes up. Every standard sits on a layout we drew before we arrived.
Scaffolding · Hemel Hempstead · Est. 2009
Scaffold that goes up right.
Designed before it is erected. Torqued, tagged and inspected every seven days. Domestic, roofing and commercial access across Hertfordshire.
Scroll to erect
02 / FRAME
Standards, ledgers, transoms.
2.4 m bays, 2.0 m lifts, every joint a torqued coupler. The frame goes up first and nothing is rushed.
03 / DECK
Boarded, railed, braced.
Fully boarded lifts, guard rails at 950 mm, toe boards at 150, facade braces tying the frame into one stiff triangle.
04 / INSPECT
A named person signs every lift.
A competent person checks the scaffold before use and again at least every seven days. The tag on the ladder is the proof.
05 / HANDOVER
Ready for the trades.
Twenty metres, six storeys, struck cleanly when they are done. Tell us your building and we will draw yours.
Get a quote/ 01 SERVICES
Six ways we get you up.
- 01
Domestic
Full house, side and gable scaffolds for re-rendering, windows, fascias and repairs. Usually up in a day.
- 02
Roofs & chimneys
Edge protection, scaffold roofs and chimney lifts with debris netting. Roofers stay safe, the neighbours stay dry.
- 03
Commercial & facade
Shopfronts, offices and flats. Loading bays, pedestrian gantries and drawings your building control will accept.
- 04
Temporary roofs
Sheeted clear-span roofs so the job keeps moving in January and the interior stays dry.
- 05
Birdcage & towers
Interior birdcage scaffolds for ceilings and stairwells, mobile towers for lighter work.
- 06
Edge protection
Temporary edge protection, hoardings and fan guards for new builds and demolition.
/ 02 SPEC SHEET
Numbers we don't round.
The same tube, the same bay, the same torque on every job. You can check any of it with a tape and a spanner.
- TUBE
- Ø48.3 × 3.2 mm
galvanised steel - BAY LENGTH
- 2.4 m
standard - LIFT HEIGHT
- 2.0 m
to next ledger - BOARDS
- 38 × 225 mm
four per platform - GUARD RAIL
- 950 mm
with mid rail - TOE BOARD
- 150 mm
every working lift - COUPLER TORQUE
- 50 N·m
checked at inspection - PLATFORM LOAD
- Class 3
2.0 kN/m² - INSPECTION
- ≤ 7 days
tagged and dated
2009first tube up
1,400+scaffolds erected
7days, longest gap between inspections
24hto a written quote
/ 03 PROCESS
Five steps, in order.
- 1
Survey
We visit, measure and photograph. Ground, access, services, neighbours.
- 2
Design
Drawing and load schedule. Ties located. You approve the price and the plan.
- 3
Erect
A trained crew, a tagged kit and a set-out line. Usually one to three days.
- 4
Inspect
Handover inspection, then at least every seven days and after any bad weather.
- 5
Strike
Dismantled lift by lift, tubes counted back onto the lorry, site left swept.
/ 04 CASE FILE 0217
Aldwick Exchange: nine lifts of facade in four days.
A 1960s telephone exchange, concrete repairs on every elevation, and a town centre that had to keep moving. Read how we drew it, built it and struck it.
Open the case file/ 05 QUOTE
Tell us the building. We'll draw the rest.
A written quote inside 24 hours. For anything over three storeys we will visit first.
01632 960431
hello@ledgerline.example
Hemel Hempstead, Hertfordshire